Power Plate Tuttle Box

Article code 128184
C$299.99
Add to cart
Fast Shipping Canada Wide !
Only a few left
  • Overview
  • The PowerPlate makes it simple to bolt any windsurf board with a Powerbox style fin-box (or Tuttle or Deep Tuttle) to the common 4-Hole plate pattern found on most kite and windsurf foils today.

    Use the included bolts to screw the PowerPlate to the 4-H

Product details

User Instructions:

  • Be sure to use a Metric 6mm fin-bolt.
    Be cautious not to cross-thread the fin-bolt
  • Be sure to get a least 12 complete turns into the PowerPlate. (Max # of turns is 16 or 3/4"). You may need a longer screw.
  • Be certain to tighten the fin bolt hard enough to compress the foam. Check & tighten as needed.
    If your board has a big V-bottom, add extra foam to outer plate edges to add lateral stiffness.
  • Use a leash regardless of your foil/fin-box setup. Impact with a log or other could cause your foil to sink.
    Adjust the head or plate mounting bolts to your preferred fore/aft position
  • Wing Forward=More lift
  • Wing Rearward=Less lift (better learning)

NOTES:

New model fits Naish Foils no modifications required

The PowerPlate has a 12 month warranty against manufacturers' defects. This does not include damage from impact or loss/damage to your foil or board regardless of impact or not.

Notes: Now fits Naish Foils hole alignment plus others! See image detailing spacing between holes to determine compatibility.

The PowerPlate has a 12 month warranty against manufacturers' defects. This does not include damage from impact or loss/damage to your foil or board regardless of impact or not.